Subject: Mick's oil cooling woes
From: ACRE
Date: 6/2/2003, 9:46 AM


The magnahelix is only one measurement at a time. Hard to get meaningful
data with only one measurement at a time. I can Fed X the manometer
and loan you my camera for a few days as I can use Robin's in the mean time.

Paul Lamar

I don't mind taking one measurement at a time, because I fly all the time. Might as well take
data every time I fly. Usually 0.5 hour in the morning before work if wx good and plane is
airworthy. So hold off shipping that out, I'll let you know.

I have a snoot on the right side feeding the airflow sensor/throttle, and I see a 0.25-0.5
in. hg increase in pressure at cruise on the manifold pressure gauge, getting a very small
boost effect.  That inlet extends forward in front of the fuel tank sump. So initially I'm
just going to extend the left side oil cooler inlet forward past the fuel tank sump.

Perry

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.