| Subject: Mick's oil cooling woes |
| From: ACRE |
| Date: 6/2/2003, 10:51 AM |
Perry, Take some "dirty" crankcase oil and paint stripes on your wing and oilcooler inlet perpendicular to the expected flow rate, then go fly. The oil will follow the air flow, and give you a good indication of the direction of flow. A number of Canard drivers here found that flow was NOT as expected. Bill Schertz KIS Cruiser # 4045
The AirCraft Rotary Engine NewsLetter. Powered by Linux. ACRE NL web site. http://home.earthlink.net/~rotaryeng/ Copyright 1998-2003 All world wide rights reserved.