Walter Williams wrote:

   hi all,      just remember upstream probe is the highest temp location but the most
dangerous.   if the probe burns off the tip you have lost the turbo and sometimes the whole ball
game.  upstream and downstream probes mounted close to the turbo will show about 200 degrees F.
difference.  just make the allowance in adjustments. i always put mine in the pipe. good luck walt

Good point. You don't want parts melting off and going through the turbo.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.