But, it looks like it will  weigh less than half of my old manifold

system,

a lot cleaner and the fuel injectors away from the exhaust.  Waiting

for

more resin to pour the second casting - we know about those things,

don't we

{:>)  One of the photos Mvc-009.jpg shows the bubbles caused by the
exothermal reaction.

 Also, the casting does not look smooth yet, because I have some

bondo type

filler stuff on it that I will sand down to a hopefully glass smooth
surface.  Also about 1" (or more) of the top of the throttle body

flat plate

mounting area will come off.

Hopefully, I will have it completed this week and be flying with it

within

another week.

Best Regards

Ed Anderson

****************************************************************************
****

Ed,.........NOW I GET IT!!!!!........You certainly have my

attention..........

BTW, Thanks for the photo of that "Dashing Caballero" in the "Mighty

Steed" :)

Was that at last year's S-N-F??
                                                 Butch

Not certain, Butch.  The photo of the "Dashing Caballero" may have been Sun
& Fun 2002 or it could have been this year.  I suspect it was last year..

Ed

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.