Subject: There has to be a better way!!!
From: ACRE
Date: 6/7/2003, 11:34 PM


Tom Smythe wrote:

Read that as less expensive.

I just got off the phone with an aircraft structural engineering firm
and they're asking for $150,000! to do the design work on the plane I've
already done the configuration work on (that part they quoted $3,500 for
if I hadn't done it yet).

Anyone know of a way a non-engineer but, technically knowledgable guy
can put together an airplane and survive in it?

Thanks,

tom

Vance might be able to help you out for a lot less money. He has designed
several very successful composite experimental airplanes

Paul Lamar

That number does indeed seem high, but one would have to have a feel
for just how detailed a design you requested.\Drawing up every rivet hole
or every ply on a composite can burn up a lot of expensive manhours if
you have a professional staff and high overhead. If you got this quote over
the phone, you must be aware that less than one percent of such calls
are serious enough to even consider. I have worked in conjuction
with Rich Trickel on quotes where we generally consider the completion
of one airframe set of parts and some tooling for composite construction
and quotes for a relatively simple 2 place are typically about 200 to 300K
and that is with low overhead and slim profit margines.

Non-engineers have designed some very fine airplanes using experience,
borrowed state of the art, good practice, and patience and only farming
out some of the major structural calculations (if at all)
The market is full of good airplane designs and kits, but I fully understand
the desire to exercise the creative juices - but do not plan on making a
bunch
of money, nor expecting a professional firm being so interested in your
design to absorb any of the costs.
Vance J

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.