Subject: There has to be a better way!!!
From: ACRE
Date: 6/9/2003, 8:52 PM


For metal aircraft I would recomend Pazmany's books in that they are much
easier to
follow than Bruhn. I really cannot recomend anything that I have seen for
someone
starting in composites. Vance


You need to write a book on it Vance.

Paul Lamar

Hi,

Thanks for all the responses - they're great!

In fact, I spent the weekend away and thought of many of the same ideas. I'm originally a stubborn
dairy farmer from Wisconsin (now living in Illinois doing computer support work). So,
perserverance is one of those things that comes naturally...

I can do fiberglass work. I had a 'Vette in the Air Force and fixed the front end on it (previous
owner rear-ended a Cadillac) and I'm not afraid of trying things I haven't done before. Also, the
farm background provided me the opportunity to "play" with engines quite a bit. I can do anything
that needs done in that department, as well.

I've played with TurboCad and a bit with the cad software that comes with AirplanePDQ. But wasn't
sure if I should pursue that or just give it to a professional to work up for me to follow. After
seeing the price tag, I know I can' afford a professional (however, I was presented with an offer
from a retired engineer that would allow me to pay him until I finish. At this point, he stated
he'd give all the funds back - I know, if it sounds too good to be true...). The professional I
called was Martin Hollman (EAA referred me to him). And I understand you have to weed out those
who are serious from the chaf. But, I can't afford that, plain and simple (it's more than I was
budgeting to put into the plane!). This is a design I wanted to fill gaps in other designs - yeah,
I think I can improve on the others (don't we all?).

So, for now, I'll take you all up on the book ideas, build a few parts with the glass or carbon
(still toying with that thought), stress test them to death, and keep hacking away at it. I've got
a nice 2 1/2 car garage that is coming together into my "shop."

FYI, it's a single engine, fixed gear, high wing design running 400HP (13B or 20B is still up for
debate). Stall is coming in around 35-45 knots with cruise somewhere between 165-190 knots. Empty
weight: 2,500lbs - Gross weight: 4,500 lbs. Cabin is over 12' long (sans baggage area in the
rear), 5' 6" wide, and 4' 6" high. So, it's big, but doable (crossed fingers here).

DAR Corp has offered to play the numbers through their software. I'm waiting on a quote back on
the cost for that single run (might be cheaper to buy the Lite version - we'll see).

I had hoped to avoid a long education in engineering, but I think I'm about to start acquiring a
new education :-)

Thanks,

tom

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.