Al Gietzen wrote:

The injectors that came in my stock 20B primary fuel rail flow 570
cc/min (I know because I had had RC engineering clean and flow test
them).  They are the purple colored, side-feed.
This is a bit excessive for my NA version of the engine, and they are
slightly higher flow than the MSD (Rochester) injectors I have in the
secondary rail.  This gives me a bit of a problem with the EC2 mapping
at, and below, the staging point, and I believe that I could get better
balance and performance with more of the fuel coming in further upstream
at the secondaries.

The question is: is there a side-feed injector that will fit the 20B
primary rail that is rated at 460-470 cc/min?

Al

Here is what I have on the subject Al. The Lucus and the Mazda ND are 
interchangeable. I know the GM/MSD don't fit as I have drawings
on them from the MSD catalog.

BTW Ernesto I still have your Lucas injectors. I'll try to ship them
with the pipe bends you ordered today.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.