John Slade wrote:
Paul,
I was talking to the guys at Japtrix ( japtrix.com ) who are
working on my engine setup. They do a lot of custom work, including nitrous
and an alchohol fueled 13B for racing. They think they could get a 13B to
run on diesel /JetA using glow plugs and a special intake / direct
injection.
I would be interested to hear your and other opinions about the feasibility
of converting a 13B/Renesis to run on JetA and getting decent reliabilty/
power / performance.
Regards,
John Slade
I think it is a very good chance. In fact just a glow plug might work.
It might add just enough additional heat to the chamber so the heavy fuel spontaneously
ignites when the fuel is injected at just the right time. Wankel Germany built
a lot of engines with spark assisted heavy fuel direct injection and they ran
fine as far as I know. Here are a couple of pictures.
However don't expect any improvement in fuel economy as the compression
ratio remains more or less the same as the gasoline version.
The Direct Injection Heavy Fuel bottle of wine is from the vineyard across
the road from the factory.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.