This is the holder and a couple of tool adaptors.
I need one that will hold a 3/4 shank end mill. I need at least three.
Paul Lamar
Mark Wrathall wrote:
If all three tools have 3/4" shanks, then a cheaper and quicker alternative
might be to to order three $18 3/4" end mill holders from Chris Wood at
www.littlemachineshop.com in Pasadena. He's a great guy to deal with. If
length is a problem, then sets of six R8 collets, which include a 3/4"
collet are only $23, and he may give you a deal on just three 3/4" collets.
http://littlemachineshop.com/products/product_view.php?ProductID=1257
http://littlemachineshop.com/products/product_view.php?ProductID=1604
Mark
The collets are a pain to open or change with an R8 taper mill Mark.
That is why the quick change tool holders are so popular.
No doubt about it being cheaper. If I can not find the adapters I am looking for
I am looking for a machine shop that can make some for me.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.