This is the holder and a couple of tool adaptors.
I need one that will hold a 3/4 shank end mill. I need at least three.
Paul Lamar
Mark Wrathall wrote:
If all three tools have 3/4" shanks, then a cheaper and quicker alternative
might be to to order three $18 3/4" end mill holders from Chris Wood at
www.littlemachineshop.com in Pasadena. He's a great guy to deal with. If
length is a problem, then sets of six R8 collets, which include a 3/4"
collet are only $23, and he may give you a deal on just three 3/4" collets.
http://littlemachineshop.com/products/product_view.php?ProductID=1257
http://littlemachineshop.com/products/product_view.php?ProductID=1604
Mark
The collets are a pain to open or change with an R8 taper mill Mark.
That is why the quick change tool holders are so popular.
No doubt about it being cheaper. If I can not find the adapters I am looking for
I am looking for a machine shop that can make some for me.
Paul Lamar
Paul,
If you do not have any luck finding those quick change tools, let me know. I will
do my homework and see if I can come up with some. They possibly may have to be
machined but I dont think that would be a problem.
Doug Mueller
RX-6 13BT
N900DM
Henderson,NV
Thanks for the help Doug. I really appreciate that. I'll pay good money to
have them made well. That will save me
big bucks. I kind of hate to buy something else and have it too become
obsolete over night. There is no standardization on this quick change tool
stuff.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.