Peter Cowan/Lexy Cameron wrote:

Any thoughts on this? Warp prop blades are held on with 4 1/4" bolts through some kind of plastic
blocks that clamp the blade. In this case the torque wrench can get at two of the nuts but not the
other two. What are the issues and work around for torquing the bolt head rather than the nut?
These blocks do not come together when tight so that there could be some distortion in the hole
causing more than usual friction.
Peter

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.