Ken used a couple of 4 or 5 inch thin wall aluminum tubes, cut them off
at an angle and sealed the stock Mazda oil coolers to
them with automotive windshield glue. The oil temp is now 130 degrees
F in the summer time. Too cool.

Paul Lamar

Ken, This is brilliant idea.  I am going to copy it only the tubes will
be inside the cowl of course.  Exhaust  through adjustable louvers.
Windshield glue is fantastic stuff.  We use it to build pads on the
bottom of horse hooves.   Jerry

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.