Here is the basic set up.
>From left to right the manometer tubes are Exit 1 though 4 and Intake 1
through 3 starting at the closest to the front of the airplane.
the pressure taps are more or less equally distributed along
the length of the cooler right down on the core.
This system worked fairly except for a pusher prop phenomena well
which I will describe later.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.