Subject: For sale milling machine
From: ACRE
Date: 6/18/2003, 9:44 AM


For the $5000 your going to spend, you could buy a good used CNC Bridgeport
with a bad controller($1000-$2000), add a cheap IBM computer(Pentium 166MHz+)
for $250, and a after market new controller($800-$1500). CNC cad/cam software
>from free-$800. Just my two cents.
Rich Gillen

Most of the CNC Bridgeport's I have seen for sale are $8000 and up.

Are they on Ebay?

Paul Lamar


Paul,
If you don't mind the smell of a little flux, try Dan Mauch's site
http://www.seanet.com/~dmauch/
I built his 3 axis/5A per axis controller and am still tinkering with some size 34 steppers
(big
ones) but he has some newer much better DC drives available. I'm wanting to control our mill
and
lathe if my interest holds up after building the Cozy.
Dan is pretty much the guru in this stuff.
...Chrissi

===============================================================
Here is some examples off ebay:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2538853234&category=633

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2539019162&category=12577

I like this guys stuff he is in Australia
http://www.lowcostcncretrofits.com/

Rich Gillen

Thanks Rich. Good excuse to go to Australia again :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.