snip...
Just some thoughts before I tear the Harley apart to put in
a new Alternator and finally install
the electric starter. What would we do without our
toys..............
Rick Girard
Rick,
I've been kicking around the idea of using a PM alternator off a motorcycle or snowmobile for
some time. I would like to mount the motorcycle flywheel between the redrive and the 13b
flywheel (and attached to the 13b flywheel) and the lighting coils to the redrive. Since I
don't have a MC flywheel lying around I can't get any measurements. Do you know the height,
width, weight, and crankshaft hole diameter of the Harley flywheel? I'm would like to
determine how much room is needed between the 13b flywheel and the back of the redrive. It
sure would be nice to have a 2nd alternator of 10/20 amps on an all-electric airplane!!!! If
anyone else has any measurements off a MC flywheel please jump here.
Thanks,
Ken Powell
Ken, I can send you my old parts and you can experiment to your hearts content. The rotor I am
discarding is original 1977 Harley and is not suited to adaptation, the spline for the crank was a
machined part spot welded to the rotor face, the new part has the spline cut into the rotor face
and uses separate spacer washers. The 22 amp upgrade kit (H-D p/n 29982-81) should work real well.
I'm considering the same thing. The kit price varies by dealer, I was quoted as high as $225, but
found another dealer who would sell it for $182 and honor a 15% discount coupon I had. The kit
includes rotor, stator, and rectifier.
Rick Girard
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.