George make sure it is 3.58  inches (90.9 MM) from the 13B end housing

mounting

surface
to the PSRU 13 MM thick mounting surface so Tracy's input shaft will work.

Paul Lamar

********************************************************************************

Hi George;

Of course Paul means 3.58 inches NET AFTER machining....Are the enforcing Ribs
internal or external? Do you have a Final L/O drawing?.....Can't quite make out
the fiberglass damper flywheel section in the photo, need to see a better
photograph....Looks pretty good so far ;-)
                                                        Butch

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.