Mark Steitle wrote:

At 12:05 AM 6/25/2003 -0700, you wrote:

Hi, fellow rotary enthusiasts. I would like to install AN hose

fittings

in my Mazda oil cooler. Has anyone already done the

research regarding what size metric threads might be in this oil

cooler.

Also, what size AN fittings might you recommend for the

hose? -10 ?  Here is a picture of my oil cooler. Hope this helps,

and

thanks in advance for any assistance rendered. sincerely,

Paul Conner, 13B powered SQ2000

Both Mazdatrix and Racing Beat sell kits for converting the oil cooler

to

AN fittings
and lines.

Paul Lamar

I bought my metric to an adapters at the local Parker Hanafin (sp?)
hydraulic fitting shop. They also make hoses to order. Look in your
local yellow pages.
[Marc Wiese]

 Pegasus Auto Racing carries a small selection of metric to AN
adapters.  Attached is page 74 of their catalog.  Scroll down to the
bottom to see what's available.

Mark S.

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.