Bob White wrote:

I'm making progress on getting the 13B installed in my BD-4, thanks
to the engine mount I received from Jerry last week.  It's solid as a
rock, and extremely light.

I still need to fabricate a rear mount.  (The 2X4 has to go!)  Jerry
talked about using a tube with rod end bearings at each end, but the
bracket on the firewall is very nearly even with the place on the block
where I need to attach, so I'm thinking a Barry isolator might work
better.  The bracket on the firewall was originally intended for a nose
gear attachment.

Great work Jerry, and great design Paul.

Bob White

--
http://www.bobwhite-abq.com
N93BD - Rotary Powered BD-4

Your welcome Bob. Glad I could help. Almost anything will work back
there. By the time you get the psru and the prop on there the
engine will more or less balance around those front mounts.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.