Mark Wrathall wrote:
Hi Paul,
I read through your threads on buying a CNC mill. I am converting a lathe,
but have been researching for the last year.
CAM Software:
You are a wizz at Rhino, they have a plug in CAM program called Visual Mill
which would be the logical choice for you. Join the Yahoo group
CAD_CAM_DRO_EDM as there is a guy from IMS Services who offers a discount
(~$300) on software for grroup menbers (use a different email address, as
Yahoo groups are a magnet for spammers.)
Controller Software:
You are comfortable with Linux, so the way to go is EMC. Freeware, written
by the US Government dept NIST: It is very powerful, having cutter radius
compensation, look ahead etc, and can output step and direction for
steppers, or closed loop though the ISA Servo-to-go card. You can download
the BDI (brain dead Install) from here: http://emc.obstinate.org/ . Or buy
it on a bootable CD for $20. This is pre compiled with the Real time kernel
compliation already done on a Redhat 6.x Distro.
Another option is Mach2 which is basically EMC recompiled for Win NT, cost
about $200.
The third option is TurboCNC from www.DAKENG.com , which is the easiest to
get started with as it is a dos program. Costs $20 shareware. This is what I
am starting out with as it has the code for lathe threading, and runs on an
old 486 laptop.
Shop PC:
Best to use an older model with an ISA slot, so you can add a second
parallel port card. All the software above supports multiple parallel ports,
and you need the extra pins for spindle, coolant, fourth axis etc. EMC needs
400+ Mhz, and can be a bit choosy about graphics cards, Mach2 probably needs
a pretty grunty machine as it is WIN NT loaded, and TurboCNC will run on
anything with a maths CoPro.
Stepper controllers.
No Brainer, Geckos. Marriss Freemanis has a rock solid reputation. I have
have thought Tracy and him should talk about having him manufacture the EFI
Controller. He has a beast of a pick and place robot to churn out these
things. At about $140 per axis you get a 7A 70V microstepping drive which
loads of people have used to power Boss type machines.
PSU:
Just a simple 70V DC output at about 15A+ though a bridge rectifier and big
caps. Marriss great info on this stuff on www.geckodrives.com.
You can tap off VCC 5V from the game port of the PC.
Machine:
Once you start looking at the price of ball screws and mucking around
converting, and making brackets, plus the price of big steppers, buying a
good used Boss is a very good deal.
Mark
You have done a lot of work on this Mark. Thanks for sharing that. My next step
is attend a few auctions and see what I can find.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.