Del Johnso wrote:

Before I torque anymore on the nut can someone confirm that the thread is
standard thread and not left threaded.  I tried with a 1/2" impact wrench
and it wouldn't budge.  I'm now going the route of a breaker bar.

Thanks.

Counter clockwise to take it off looking at it from the back.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.