Del Johnso wrote:

Before I torque anymore on the nut can someone confirm that the

thread is

standard thread and not left threaded.  I tried with a 1/2" impact

wrench

and it wouldn't budge.  I'm now going the route of a breaker bar.

Thanks.

Counter clockwise to take it off looking at it from the back.

Paul Lamar

Right hand threads.
Royce

wadebush wrote:

Righty tighty, lefty loosy.
It took me a 3/4" breaker bar and a five foot cheater pipe to break mine
loose on my 20b. It releases very fast so be careful.
Wade

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.