Subject: Cooling System Restrictor - Good or Bad?
From: ACRE
Date: 6/29/2003, 10:01 PM


Some of you people flying have water pressure gages.
Where are the gages tapped in and what are you seeing in the
way of pressures?

Paul Lamar


My engine is a 1986 13B fitted with Racing Beat  2 sheave aluminum pulleys to
slow the water pump and alternator roughly 20%.
The coolant pressure gage is in front housing on the sparkplugs side and I have
noted about 10 psi at 5400 rpm at 3500 feet altitude.
Yvon.

I have the heater port routed to that little rad under the cockpit that
provides cockpit heat. The coolant pressure gauge is tapped into that
line near the mini-rad since it is available right there. Also 10-15 psi
normally.

--
Perry Mick
Custom Composite Props
mick@bridgingworlds.com
http://www.ductedfan.com

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.