Subject: Oil flow direction through the cooler
From: ACRE
Date: 7/2/2003, 6:11 PM


Thanks, Ed, for the explanation.  I would surly have connected it backwords.

Now, another question for any knowledgeable person in the group:  Wouldn't
you know it, the most convenient location for the stock RX-7 oil cooler
requires it to be either mounted upside down, OR have the airflow backwards
to get the fittings to come out in the right direction.  I can envision
problems with it upside down, but is there any ramifications if the airflow
is reversed?  It sure would make it less hard (not really easy) if reverse
airflow would not cause problems.

Thanks

Bob Darrah

I don't have one here but in theory it is possible to shape the fins
in such a way as to maximize the air turbulence and consequently the heat transfer. 
Intuitively I would think that means they are not symmetrical. That could 
be part of Perry's problem. Just a wild ass guess.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.