Subject: Long EZ motor mount and cooling
From: ACRE
Date: 7/5/2003, 12:15 PM


The oil cooler is on the other side alongside the
water rad. One duct for both.

Paul Lamar


Paul, looks good, I'm going to buy an engine from Alan so I even more
interested. Question, how good do the tangental mufflers work? Have you
heard one at "full chat" as our brit friends would say? Bill Jepson

Here is a top view. They work pretty good considering there is nothing
inside
them. I would make the can at least .049 SS and maybe .065 to be on the
safe side.
You could also fab a 3 inch square tail pipe which should also help.
The square shape chops up the wave according to Russian research on
rotary mufflers. Dave Atkins engine is very quiet and Tracy used one for
years
until the .035 SS burned through. A pusher prop chops the sound waves as
well.

Paul Lamar


I like this muffler setup. Very nice for pushers. I'm assuming that some
type of either a slip joint or flex tubing might be required between the
muffler and the exhaust manifold to allow for differential heat expansion
and possible fracture?
      If anyone is gearing up to make one of these, and might consider
making two of them, I am interested in purchasing the other one. Thanks.
Paul Conner

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.