Subject: Lancair ES - Top speed to date
From: ACRE
Date: 7/12/2003, 7:51 PM

Thomas Parkes wrote:

----->
How fast have you gone so far Tom?

Paul Lamar

Top speed--straight and level at 14,000'--to date was 195 KTAS (224 mph).
Haven't been able to do a max speed check any higher due to need for Oxygen
system.  One of these days I'll borrow a portable tank.

The Ivo Prop is definitely the limiting factor near the top end.  Would
probably get 15-20 knots more with a $12,000 MT electric constant speed.

In the meantime, I've been working on cooling systems.   Climb temperatures
are real touch-and-go at 93 degrees surface temp, but then, again, they
aren't much better in a Lycoming IO-360 powered Lancair 360 I've been
flying.  We have to use cruise-climb speeds of 140 knots indicated in either
airplane to keep hot day temperatures below red line.  In the traffic
pattern my 20B powered ES engine temperatures are cooler than the
Lycoming's.  Do more than two touch-and-goes on a hot day in the Lancair 360
and you're going to exceed oil temperature red line of 245 degrees.  My ES
hasn't exceeded 225 degrees oil temp/233 degrees coolant temp.

Incidently, I had a very interesting visitor last month: Alan Tolle was in
town visiting a mutual friend/ EAA member who introduced us.  He spent a
good hour and half looking things over and telling me about his RV-3 rotary
experience.  Now a turbo 20B ought to do real well in Alan's Nu-Venture
speedster.

Tom Parkes

Tom. I think some cuffs near the roots of that  IVO prop will improve
the cooling during climb out.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.