Bill Schertz, you mentioned your front  injector holder protruded
through the cowl surface on the Kis Cruiser.
Did you saw this oil Filter holder off and plug the holes
with pipe plugs? It is preventing my intake manifold from laying
right down on the top of the engine.

I am going to fill the oil passage holes with candle wax before I saw it off
to prevents the  iron particles from getting into the oil galleries.
I will then use a small magnet to remove the iron particles them from the wax.
If any wax gets into the oil system it will probably melt and be dissipated
in the oil. Hopefully.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.