You betcha-ass there is!!!......I have been asked NUMEROUS times to

design such

a beast, plus I personally know someone who can most DEFINITELY use

it....Right

Vance?? ;) ......BTW Paul, how long is long?? :)

                                                       Butch

Say 30 inches instead of 14 inches. Shaft MUST be four inches
in diameter as torsional resonant frequency would DEFINITELY come into the

picture.

Paul Lamar

Paul &Butch,
I was considering this as part of my PSRU and bellhousing package.
My solution was to have an insert between the bellhousing and the PSRU - to
what ever additional length requirement. This then would reduce the need for
the extra long [output] shaft and keep it to about 3" - keeping it all modular - what
do you think !?

George (down under)

Well that moves the CG of the PSRU. I was thinking of keeping the weight
of the PSRU as close to the engine as possible to ease (pardon the pun.) 
the CG problem.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.