Subject: Lancair ES - Top speed to date
From: ACRE
Date: 7/14/2003, 11:30 PM

Thomas Parkes wrote:

Tom. I think some cuffs near the roots of that  IVO prop will improve
the cooling during climb out.

Paul Lamar

I've given some thought  to cuffs near the IVO prop roots, but don't really
know enough to design and install same.  I remember seeing them on the big
KB-50's of forty years ago, even got to ride in one before they started
falling apart in midair due to severe corrosion.

What kind of airfoil would we be looking for?

Tom Parkes

The centrifugal loads are not high as the radius is not much.
Sand the prop and epoxy blue foam to the hubs about 10 inches out. Carve the foam with
about a 45 to 60 degree angle of attack airfoil shape. Not critical.
Cover with glass cloth. Paste on a coating of micro balloons and sand.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.