Paul Lamar wrote:

I am going to fill the oil passage holes with candle wax before I saw it off
to prevents the  iron particles from getting into the oil galleries.
I will then use a small magnet to remove the iron particles them from the wax.
If any wax gets into the oil system it will probably melt and be dissipated
in the oil. Hopefully.

Russell Kent wrote:

Use canning parafin; it melts at a lower temperature, and when melted is less
viscous than some candles' waxes.  It's also dirt cheap.  :-)

Russell Kent

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.