Rick Girard wrote:

Paul, your posting of the rubber rod end got me thinking so I went looking at what hot rod shops had in the way of suspension
link components. This is what I found at Pete & Jakes:

-------------------------------------------------------------------
                        ADJUSTABLE BAR END
                        Steel stud has 5/8"-18 threads. Includes
                        urethane bushings & jam nut. Bushing sleeve
                        size to accept 1/2", 9/16", or 5/8" bolt
                        (include size with part number).
                        Available straight, 5 or 9-degree angle.
                        #1260-(size) Straight  $18.00 ea.
        [Image]         #1261-(size) 9-degree angle  $19.00 ea.
                        #1262-(size) 5-degree angle  $19.00 ea.
                        #1260C-(size) Chrome- straight  $25.00 ea.
                        #1261C-(size) Chrome -9-degree angle
                        $26.00 ea.
                        #1262C-(size) Chrome - 5-degree angle
                        $26.00 ea.
                        [Image]

The picture didn't cut and paste, unfortunately, but I'm sure anyone who is interested can go check it out. The 5/8-18 is a bit
big but could be drilled out to save some weight.

Rick Girard

Looks good Rick should work great. Especially if you can get left and right
threads. Makes tuning the engine thrust angle easy and quick. 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.