kevin lane wrote:

at Arlington I was listening to the henrob salesman and have to admit

that it appears to be just what I need to complete my

plane.  I seem to remember that someone on this list had one and

replaced it with a tig welder however.  do the henrobs work

well?  I have 3/16ths max AL plate to weld in my intake plus all the

cooling system stuff yet.  there appears to be a look alike

for sale on e-bay.  any comments?  anyone want to sell their henrob?

Kevin Lane  Portland, OR
e-mail-> n3773@comcast.net
web-> http://home.comcast.net/~n3773

I have been using the Henrob since the early nineties, and would not touch
the classic dynasor any more. Except for the natural limit on thick
materials, you can make welds looking very much like TIG.
When you buy the set, get an extra #0 size jet and drill it to a size halve
way up to #1. This gives you better coverage of practical flame size.
When I did that, the Henrob sales person agreed that there was a problem.
This modified tip is the one I use most.

Richard Sohn
N-2071U
unicorn@gdsys.net
www.gdsys.net/WWWmembers/unicorn/

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.