Got the stock pump in the test rig today.
It seems to pump a lot less water while wide open. At
4300 RPM it is only pumping 55 GPM
I will not run any extensive test until the RTV sets up.
Will do that tomorrow.

Bill I also ran a test on the new pump at 20 psi but I left
the data in the hangar. No significant changes however.
The pressures are all just shifted upward. I'll upload the data tommorrow.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.