Subject: Has anything sunk in?
From: ACRE
Date: 7/23/2003, 11:19 PM


Why two rads? Why not just one on the cool side.... spark plug side
of the engine?

Paul Lamar


Paul, several reasons for two rads. First; I beleve I can get a better pressure
differetial across two smaller rads. Second; I would like to try to reduce
cooling drag by running the smallest outlets I can. Third; I can get the needed cu inches to fit easily within a conventional
cowl with the oil radiator in front lower,
(chin) position. Lastly; I would like to run a blow through heat shield around the exhaust to keep the temps down. Oh, and
really lastly; I can get the smaller radiators cheaply from my friends in the motorcycle business :-) Bill Jepson

Why do you think you can get a better pressure differential across two rads?
You can get small outlets by closing down the venetian blind cowl flaps.
Is this for a three rotor? If so motor cycle rads are not going to hack it.
You are looking at a 750 to 800 cubic inches in rads to cool a three rotor.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.