George Lendich wrote:

Paul,
Update on the Bellhousing.
Front of pattern.

Internal stiffeners and stand-offs for lower housing bolts.
George (down under)

Photo of the starter mock-up for position - see how close the bolts are

near the lower starter mounting.

George (down under)

I mentioned this to a few people at OSH and they were very interested.
They felt Tracy rotary installation and PSRU looked a little

unprofessional.

Paul Lamar

Paul,
Thanks for that matey, I appreciate the free advertisement.

Sorry to hear about Tracy's set -up, I guess their referring to the plate.
It's easy to criticise but it has been difficult to say the least to get to
this stage ( thanks to you and Butch I'm getting there), therefore I can
appreciate Tracy's dilemma.
BTW, providing it all works out, I happy to supply to Tracy if that helps in
any way. I don't want to compete with Tracy in regard to gearboxes - I'm
doing this out of need, not greed!

The recognition would be nice, if all goes well, but I don't see this as a
full time business. I want to get this out of the way and get onto other
things, like finishing my gearbox, 12A manifold, oil sump etc, etc.
George (down under)

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.