Subject: [SoCalRXClub] Dyno RX-8
From: ACRE
Date: 8/3/2003, 7:20 PM

Hans Conser wrote:

Begin forwarded message:

From: Dan Mazzella <dan@rotarynews.com>
Date: Sun Aug 3, 2003  6:08:01  PM US/Mountain
To: rxecret7@aol.com
Cc: socal7s@yahoogroups.com, sdrx7club_announce@yahoogroups.com,
fc3s_org@yahoogroups.com
Subject: [fc3s_org] Re: [SoCalRXClub] Dyno RX-8 =(
Reply-To: fc3s_org@yahoogroups.com

We (Berny and me at rotarynews) are investigating the issue.   We
suspect the ECU is programmed with a brake in program that'll run the
engine rich to protect it.  It should be possible to verify this with a
dyno run with a wide band O2 attached to monitor AF ratio.

We are in contact with folks within Mazda, (called them on Friday which
was Saturday Japan time) so nothing has been reported back to us yet.

--dan

rxecret7@aol.com wrote:

This is Tony here with Rotary Xecret 7, just to let you guys know I
dynoed
the RX-8 on Friday and the car only pulled 185 to the wheels, which is
pretty
low for a 250HP rating.
We then disconnected the exhaust and intake and that pumped it up to
about
192RWHP.

I will keep you guys updated on the Project - 8 or you can check out
the
site, haven't got time to post any pictures up yet.

OH yeah, just a reminder next month's Import Racer issure will cover
the BBQ
back in June.

Tony

The one I drove sure and hell had 250 HP. I tested cars for a living
more or less for 30 years. Given the increased size of the ports and the RPM red line
there is no doubt what so ever in my mind that the engine is capable of 250 HP.
Now a more likely scenario is the engine is running too lean for emissions
reasons.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.