Subject: More good news. Midwest engines bought by Diamond Aircraft
From: ACRE
Date: 8/4/2003, 11:36 PM


Good new for all you guys looking for 100 HP light weight rotary.

There was this fine looking all carbon fiber Swiss made airplane
at OSH called a Aeriks200 powered by the Midwest 2 rotor all aluminum
Wankel rotary engine. 105 HP at 7500 RPM. Weight is 116 pounds with PSRU
less alternator and exhaust system.  http://www.aeriks.com/indexfla.htm


The Austrian/Canadian company called Diamond Aircraft maker of the Katana
airplane  bought the rights to the engine and it is rumored they have made
power improvements. Makes more sense than that silly econ box Mercedes
A class turbo diesel engine that are fooling around with.

http://www.diamondair.com/default.htm

I suspect they did away with the power robbing cooling blower
for the air cooled rotors and replaced it with oil cooled rotors such
as Mazda is using. Lets hope so. Rumor is; it is now generating 140 HP.

-
I talked to one of their saleman at Osh. He told me it was 100HP@7500rpm. The plane I think was normally $60000, $50000 show
special. I asked what just the motor setup would cost and they said $16000. I coughed, gagged really. I said for $100 I could
buy a used 13b and rebuild it for $800, buy a new PSRU from Tracy and still only have about $4000 in it. There just happened to
be a guy who worked for Mazda out of California who was also looking at the motor. He said he didn't realize that many people
had an interest in the rotary for kitplanes use. I told him about the rotary group. I also told the planes engineer and the
salesman it needed more HP like a 13B or 20B. The salemans wanted to know if the 13B and 20B would fit. I said I thought they
would from the looks of it. I said for $60000 and only two seats, it better go a hell of a lot faster than they show it. The
plane itself looked well built, neat design. Maybe a little narrow in the seating for us fat boys. I also said a four seater
would be nice. The design engineer said he thought they would sell more two seaters than four seaters. I guess every one over
there in their county has been riding motorcycles or bicycles and driving two seat sports cars to long to look at the rest of
the world to see there is more 4+ seated cars/SUVs/trucks sold than 2 seated ones.
    I don't know what it is with these design engineers that can't use some basic common sense when designing something new for
this century. I have never seen so many poorly thought out designs in kitplanes and ultra-lights as I did at Oshkosh this year.
Also the fact that most of them didn't even show up to display their planes. I think kitplanes a few years ago said there was
750+ kitplanes on the market. I would guess something like maybe 100 kitplane/ultralight venders showed up. I guess people will
vote with their dollars or design their own plane. Planes are made to haul people, not just a motor and fuel and go faster than
my sports car.
Rich Gillen- 

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.