Subject: [SoCalRXClub] Dyno RX-8]
From: ACRE
Date: 8/5/2003, 4:29 PM


Harley wrote:

Forgot to mention...I did three runs through three different measured miles
here.  At 72 mph ... cruise control holding it well enough that I couldn't see
any change from 72, so it must've been +/- .5 mph or so.

Average of the three runs at 72 indicated was 70.6 mph.

Not bad for a production speedometer!


Put more air in the tires and measure it again.  :-)

Russell Kent

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.