-clifton j dugan wrote:
I am new to this forum and know nothing about rotary engines other than they
don't have as many hand grenade problems. My desire is to have a high
horsepower power plant for an airboat which has no weight requirements and
has lots of room for coolers and radiators of large size. I need to have
a power plant that will put out 750 horsepower with a high reliability
factor and don't care about weight nor space. Gearbox reduction for
propeller needs to be reliable and handle the horsepower but can be any
size. Airboat people are already using good props that can handle the
horsepower but I haven't seen any rotary engines although I know there must
be some. It seems like a three rotor with turbo might fit this requirement.
Several of my friends are using big block chev engines putting out 700 to
900 horsepower but they hand grenade them often.
Any idea about where I might get more info on this subject?
Boy, you guys sure bash this scoop problem pretty well. I know cooling is a
serious subject with airplanes.
Clif-
Contact Racing Beat Clif. They have just what you are looking for. 1000 HP.
350 pounds. You will need an old Bell 47 Helicopter gear box for the
prop.
http://www.racingbeat.com/
Paul Lamar
BTW Clif I think you would be better off with two turbo 13B motors.
More prop area for better low speed thrust. Up to 800 HP each on alcohol
and nitrous oxide. Twins airplanes always climb better than singles for
this reason.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.