Perry you need to make Tom Parkes and the Cosman guys a carbon three
bladed fixed pitch prop for the 20B. Tom, you need to get one of Perry's
super props. Klause was snickering to me today that you where going
only 195 kts on 300 HP. I said; "what do you expect out of an IVO
prop."
It may be awhile before we can test Butch's var. pitch prop.
Paul Lamar
I believe that I made it quite clear a long time ago that I put the IVO
prop
on as an inexpensive way to get my ES airborne and to work out the details
of the engine installation/ cowling. I was hoping that a 3-blade
version of
the ACRE prop would be forthcoming in the reasonable future. Barring that
development, I'll eventually have to acquire an MT electric c/s. In any
case, when I upgrade the prop I'll discover exactly what the extra
performance costs--something between $500 and $1000 per knot as a rough
initial guess. For now, at least I'm flying.
Tom Parkes
Yes of course you did Tom just kidding. Are you sure you need a variable
pitch?
Paul Lamar
This is something that Everet Hatch always advocated. He was not shy about
spinning a prop faster than normal for "war power". He felt that the price
of an adjustable prop was not justified. Of course this was in his RV-4
aircraft where the mission is all around performance and not just
cruise. Sort of like having lower rear end gears in the hot rod (4.11 vs
3.08's). Of course you will still compromise some performance on one end
or the other. Back to that $500-1000 per knot premium.
Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.