Al Gietzen wrote:

For those using Tracy's re-drive, and find a problem with the 6:00
starter position, here are some pics of another place to put using the
existing mounting bolts - about a 9:30 position.

The 6:00 position hit a cross member on my mount; and I wanted to get it
away from my exhaust going by on the other side.  Very carefully found
the new center point for the starter shaft; machined a new mount hole;
drilled one new bolt hole in the starter mount flange to get the right
bolt spacing; cut off the bottom of the adapter plate.

Al

Good idea drilling that extra hole in the starter mounting flange Al.
Actually the old flange could be cut off completely and a new flange
could be tig welded on with the holes matching two of the bell house
mounting bolts.

Paul Lamar

Ernesto Sanchez wrote:

Looks great Al!  Would you consider selling a template of the mod?  What
starter are you using?

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.