Subject: Tom Parkes report on OSH trip:
From: ACRE
Date: 8/12/2003, 4:15 PM


Dave Arbogast wrote:

Hi Paul... do you know where Thomas Parkes got his 20B ?

--
-dave
mailto:dave@arb.net
http://arb.net

As I recall he bought it from Dave Atkins. I could be wrong.
Bruce Turrentine will build one up for you from new parts.
He has an in with Mazda Racing and they still provide 3 rotor parts.
He did Tracy Crook's. He does a few extra things for the aircraft
people. I think the price will be similar to what you would have to
pay on the Internet for a used 3 rotor engine. Last I heard that was
anywhere between $3,500 and $5,000. Maybe more as they are getting
rare.

Bruce Turrentine <rotaryresources@aol.com>

Paul Lamar

I got my shiny new 13B from Bruce in March for about $4K.  4-port NA
9.7:1 comression rotors with the aviation mods.  I talked to him briefly
about a 20B.  He wouldn't give a firm price on the 20B until he had a
firm price for the components from his supplier as they varied quite a
bit from day to day. It would be well over $4K though.

Bob White

- - - - - - -
http://www.bobwhite-abq.com
N93BD - Rotary Powered BD-4

BTW Bob I was going to ship the water pumps today but the spindle bearings
went out in my CC mill. It will now probably be the middle of next week
as the mill spindle is in the overhaul shop.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.