Subject: Direct injection, was fuel return systems
From: ACRE
Date: 8/14/2003, 3:09 PM


Less current draw and the airplane will fly further with a dead alternator.
How much are those K-jet injectors?

You could also use staged PWM fuel pumps to get a wider
dynamic range.

Paul Lamar

Paul, I saw something that I found very interesting while getting stuff for the 20B.
 I got a good look at the latest Mercury outboards. The newest DIRECT injection engines 
have the needed parts for a direct injection with crank triggered electronic ignition. 
The 225 hp 6 cyl would be perfect for the 20B. I really like the idea of direct 
injection for two reasons. 

First: The injectors are naturally "cold side". That could make the 
manifolding much simpler. 

Second: The system would help produce a version 
of the strat-charged engines tested by Mazda. No need to put the runners 
over the top of the engine also improves cowl clearance. 

This wouldn't 
be as simple as the "dribbler injection" but has some real advantages. 
I wanted to try it as soon as I decided to go rotary. I just couldn't 
figure where to get the parts!

 I won't do this on the first try. I will research the use for future
 use though. The only difficulty would be with supercharged engines. 
Not sure enough fuel would be available. The other thing that's good 
is that the outboard is designed to be run very much like an aircraft
 engine. Long periods of full throttle operation, and high-moderate 
speed cruise. Off-shore use requires very good reliability. 
Well enough for now.
Bill Jepson


 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.