Subject: Fuel Schematic (Draft) for the Glastar
From: ACRE
Date: 8/18/2003, 12:02 PM


<Snip>
    Similar arrangement that I have in my RV-6A except my small (approx
1
quart) header tank is on the forward side of the firewall.  I have
cooling
air directed on the pumps and header tank as well as a low pressure
boost
pump on the tank side.  I found that using Autogas on a very hot day a
tendency for the fuel to perculate.  Turning on the boost pump stops it.
My
boost pump produces approx 6 psi fuel pressure.  Perhaps the head
pressure
from wing tanks and having the header tanks out from under the cowl will
preclude you from having this problem.

Regarding pressure regulator, with both fuel rails tied together, one
pressure regulator should handle both just fine.

One question, on your schematic you show a filter after the EFI fuel
pump
with a relief valve.  What is the function of the relief valve?

Ed Anderson
RV-6A N494BW Rotary Powered


Del Johnson wrote:

I mislabed it.  The referrence to relief valve should read pressure
regulator.  I will be using the pressure regulator off of the secondary
injector rail.


The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.