>From the home builders friend; McMaster Carr.  'Silicon coolant

hose'

page 196 on-line catalog.  Good to 350F, and the 1 1/2" is good to

op

pressure of 125 psi.  3' minimum.  They also have the silicon heater
hose is sizes up to 1 1/4" which has lowere pressure rating

What size do you need.  I have a couple of feet of 1 1/2".  Could

sell

1 foot.

Al

Steve Brooks wrote:

Thanks Al,
A foot probably won't help me much, though I'm not yet sure of the

lengths I

need yet.  Is the stuff fairly flexible ?
Steve

The Silicon coolant hose has 3 plys of polyester embedded in the wall,
and I would describe    it as 'fairly stiff'' rather than 'fairly
flexible'.  For sizes of 1 1/4" or smaller you can use the silicon
heater hose which has just one ply of nylon and is pretty flexible.

Al

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.