Subject: Cosman Pacific Flyer 1/4 page ad.
From: ACRE
Date: 8/19/2003, 11:14 AM


          Way to go Cosman guys. I am beginning to think you guys are serious :)

          Please supply a firewall forward package while you are at it. Get Bruce
          Turrentine to build the 3 rotor motors for you or get set up to buy the 3 rotor parts
          from Mazda Racing yourself. Word is Mazda is continuing to make three rotor
          parts.

          You will be right up there with Van supplying both aircraft kit and engine.

          Will make a wonderful aircraft.

          Perry you need to make Tom Parkes and the Cosman guys a carbon three
          bladed fixed pitch prop for the 20B. Tom, you need to get one of Perry's
          super props. Klause was snickering to me today that you where going
          only 195 kts on 300 HP. I said; "what do you expect out of an IVO
          prop."

          It may be awhile before we can test Butch's var. pitch prop.

          Paul Lamar

     Pacific Flyer also wrote an article and here it is.
     Way to go guys.

     Paul Lamar

Of course we're serious. We just have families and jobs. We'll be building and flying
airplanes till they pry our cold dead fingers from the epoxy cup, we're here to stay.

Sorry about the delay folks. Been busy/out of town. Keep trying to hook up with you
Paul when you're out of town. Difficult.

We want to supply a FWF package and with all your great work, it looks like it's 
going to be possible. It's kind of fun to tell people if they really want 
to ,they can use an aircraft engine, but we don't recommend it. : {>

Managed to hook up with Tom Parkes when he was here in Provo, great guy and neat engine install.

We're working on wing internals now, flap mechanism to be exact. We think we 
can get it all inside the wing, not bad for full fowler flaps.

To answer a later e-mail on the V-tail, we believe we know where Beech 
went wrong. My grandfather owned a C model Bonanza which didn't have the 
boogie problem later Bonanzas did. As Beech grew the airplane from 2200 to 3600 gross, they needed
extra tail. They accomplished this by scabbing 7 inches onto the leading edge of
 the tail, widening the chord - decreasing its effectiveness, and decreasing 
the distance between the wing and the tail, making it less stable in pitch and yaw.

We have a long fuselage and pretty generous tail area, I predict we'll 
convert a lot of you V-tail skeptics out there. Besides, it's got sex appeal. The V tail stays.

How much are props Perry? We would need strictly a cruise prop. we anticipate 
an empty weight of no more than 1300 lbs so we'll just live with the slightly longer TO run.

As for our next "for fun" project....it's on the drawing board now. 
a 75% P-38 with turbo 3 rotors. Of course we'll need one custom redrive 
to make one side spin opposite the other...Tracy?

Thank-you all, especially Paul, for your help. It's greatly appreciated.

I'll send some pix of the current project later.

Chris C.
microcosman.com/aircraft


 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.