I preferred a commercial FWF package that was "wrung" out.

That is not yet available, so if I am to fly behind the
superior technology that a rotary represents for GA anytime soon,
it will only be safely possible through the expertise that is
offered here. Thanks for, and looking forward to,  more good advice!

Duane Zavadil

Duane,
If you can wait, Tracy Crook (highest time with and behind a rotary in a
fixed wing aircraft) is working on a FWF package for the rotary engine.
His web site is...  http://www.rotaryaviation.com/
They are having a rotary round-up in October.
Wade Bush

So too are the Cosmans. Tracy is working on an RV8. That points up
the limitations of firewall forward packages. A business person getting
into the business must pick a specific popular home built to support as it 
would not be profitable to cover all types of home built kits.
That also applies to all the various versions of Van's airplanes.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.