Thanks Hans,
To show you how far off I am, I've been trying to use a safety
factor of 10 for the rotating parts! :)
I don't know if you caught the rest of my pipe dream but it (my
dream) is a small two place (heavy lift) coaxial with a fixed pitch
tilt
type rotor. The two engines would be, hopefully, to eleminate any need
to auto-rotate. I'm still respectful enough of chance that I'll
mount a
ballistic system above the rotor head.
I've decided on the ShopMaster 3 in 1 CNC machine to purchase for
this learning process. Worst case, I'll end up with a machine to build
parts for my car. :)
Thank you for your time and thank you for the links!
Phil Williamson
Phil, when you say fixed pitch tilt type rotor you mean that you intend
to tilt the rotor by tilting the shaft? If this is the case you do
realize that you will need some serious hydraulics for this as you will
be fighting the entire weight of the helicopter when you attempt to
tilt the rotor?
Also, how do you plan on controlling lift without pitch control? By
varying RPM
perhaps? It is a cube function so the lift of a rotor varies greatly
with RPM, plus you will get into different harmonic resonances as you
vary RPM. Bad idea.
Hans
I understand your questions and I'll answer as long as Paul doesn't care about me talking about my hairball ideas,ok? :) I do have some ideas I'd like to toss out. At the least, it may provide you guys with some laughter. :)
Phil
Is this a model you are talking about building Phil?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.