Subject: proper material for shaft/ heli design
From: ACRE
Date: 8/19/2003, 10:33 PM


Is this a model you are talking about building Phil?

Paul Lamar

Yes. To see if it will work. I'm nutty...but not that nutty! I'll start off with 
the whole thing tied to the ground. I want to see if I can get the directional 
control first. Most likely 1/4 scale so the folks next door don't freak on me. :)


     But, I want to work with the same materials as a full sized machine
so I can learn the lathe/mill process. Most of the RC stuff I see is
brass, aluminum etc.

     What turned on "my light" was seeing a guy ( I think it was Sean
Tucker)  hang his aerobat by the prop out at the Hillsboro airshow a few
years ago. He finally started to torque turn (being an airplane with no
yaw control) but he was darn near pointed to the sky just hovering. I'm
thinking:  Why can't I use a pair of stacked props (counter-rotating)
and do the same thing?

      Crazy I know. But this has been driving me nuts for 5 years or so.
I finally decided to just try it (as a model). All I can do is fail. :)

      FWIW, I'm not totaly green about aircraft. I've had my PPL since
1971 and have more than a few hours in gyrocopters. Remember that crowd
over by Jim Vanek's building  at Scappoose ? Well, that used to be my
hangout on weekends watching Jim and his dad Chuck. I just want
something more than a gyro. If it takes me the rest of my life figuring
out how, well, so be it. :)  I also hung out with Everett Hatch a bit (I
believe I told you once that I knew him since I was 16 years old) which
puts it back in the 60's. Not that it helps, but I'm hoping I may have
learned something from him.

Phil Williamson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.