Way to go Cosman guys. I am beginning to think you guys are
serious :)
Please supply a firewall forward package while you are at
it.
Get Bruce
Turrentine to build the 3 rotor motors for you or get set
up
to buy the 3 rotor parts
from Mazda Racing yourself. Word is Mazda is continuing to
make three rotor
parts.
You will be right up there with Van supplying both aircraft
kit and engine.
Will make a wonderful aircraft.
Perry you need to make Tom Parkes and the Cosman guys a
carbon
three
bladed fixed pitch prop for the 20B. Tom, you need to get
one
of Perry's
super props. Klause was snickering to me today that you
where
going
only 195 kts on 300 HP. I said; "what do you expect out of
an
IVO
prop."
It may be awhile before we can test Butch's var. pitch
prop.
Paul Lamar
Pacific Flyer also wrote an article and here it is.
Way to go guys.
Paul Lamar
Of course we're serious. We just have families and jobs. We'll be
building and flying
airplanes till they pry our cold dead fingers from the epoxy cup,
we're
here to stay.
Sorry about the delay folks. Been busy/out of town. Keep trying to
hook
up with you
Paul when you're out of town. Difficult.
We want to supply a FWF package and with all your great work, it
looks
like it's
going to be possible. It's kind of fun to tell people if they really
want
to ,they can use an aircraft engine, but we don't recommend it. : {>
Managed to hook up with Tom Parkes when he was here in Provo, great
guy
and neat engine install.
We're working on wing internals now, flap mechanism to be exact. We
think we
can get it all inside the wing, not bad for full fowler flaps.
To answer a later e-mail on the V-tail, we believe we know where
Beech
went wrong. My grandfather owned a C model Bonanza which didn't have
the
boogie problem later Bonanzas did. As Beech grew the airplane from
2200
to 3600 gross, they needed
extra tail. They accomplished this by scabbing 7 inches onto the
leading
edge of
the tail, widening the chord - decreasing its effectiveness, and
decreasing
the distance between the wing and the tail, making it less stable in
pitch and yaw.
We have a long fuselage and pretty generous tail area, I predict
we'll
convert a lot of you V-tail skeptics out there. Besides, it's got sex
appeal. The V tail stays.
How much are props Perry? We would need strictly a cruise prop. we
anticipate
an empty weight of no more than 1300 lbs so we'll just live with the
slightly longer TO run.
As for our next "for fun" project....it's on the drawing board now.
a 75% P-38 with turbo 3 rotors. Of course we'll need one custom
redrive
to make one side spin opposite the other...Tracy?
Thank-you all, especially Paul, for your help. It's greatly
appreciated.
I'll send some pix of the current project later.
Hello Chris,
That was me asking about the V-tail wollowing (boogie) phenomenon.
Thanks for clearing that up!
You didn't say if you need a bell housing !!?
George (down under)
I'm definitely interested in the bell housing. Especially if it's a
strength/weight improvement over Tracy's current design, with all
greatly deserved respect.
Chris C.
microcosman.com/aircraft
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.