Chris:
These are not firm numbers, but I estimate the price would be in the
$1000-1200 range for a 2-
blade and $1500-1800 for a three blade. This would be for a
fixed-pitch, carbon-fiber all-
composite blades with a wood hub. My method has proved itself on my
small-diameter high-speed
fans, but with a full-size prop I would like to see it ground tested
similar to LAEV prior to
flight. You can send your specifications directly to me at
mick@bridgingworlds.com and I can
work up a design. Include desired cruise RPM, HP, diameter, airspeed,
direction of rotation,
and number of blades.
If I remember correctly, Tracy has an engine test stand setup? Paul
should have one soon?
Perry
I'll run that past the team.
Chris
Perry,
I talked with the team (Dad) and it's a go, less time making prop, more
time making airplane. Turrentine says our motor NA will make about
290HP @ 6K rpm @ sea level. We plan for a cruise alt. around 10-12K ft
at a cruise rpm of 2400 prop and airspeed of 230 mph. Rotation as per
RD-1B redrive - clockwise I think. 3 blades. I think 76" diameter
should do, I'll check to make sure.
Which airfoil do you use?
Only thing left is the deposit. How much and where to?
Thanks for the help,
Chris C.
microcosman.com/aircraft
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.